Choose bird netting by starting with the target birds and the intended enclosure, then agree a net and installation layout together. The product name alone does not determine the aperture, finished panel size or fixing arrangement. These five checks help turn a site description into a specification that can be quoted.
Five decisions to record before ordering
| Selection step | Question to settle | Information to record |
|---|---|---|
| 1. Material and construction | Which proposed construction suits the intended use and exposure? | Describe the crop or building application, outdoor exposure, handling and seasonal use. Ask for evidence relevant to the actual proposed product. |
| 2. Mesh opening | Which aperture is appropriate for the target birds, and how is it measured? | Identify the birds to be excluded. Record the aperture unit and measurement method, including the condition of the net during measurement. Do not apply one generic opening to every bird or pest. |
| 3. Colour and visibility | What visual requirements does the site have? | Record colour preferences, visibility and any specified light-related requirement separately. Colour alone does not establish light transmission or performance. |
| 4. Finished dimensions | What panels, joins and edges are required? | Provide a labelled layout with each panel, width, length, unit and reference. Agree seams, edges, overlaps and access openings before finalising dimensions. |
| 5. Installation and access | How will the perimeter, supports and working access be handled? | Identify supports, fixings, entrances, obstructions and inspection access. Have the actual support and fixing arrangement reviewed for the site; a netting order is not a complete installation design. |
Measure the route of the net, not only the ground area
Start with a sketch showing the protected area, support positions and any changes in height. Mark whether a dimension describes the ground footprint, the support-to-support route or a finished panel. Include side drops and access areas in the layout rather than leaving them for the person preparing the quotation to guess.
Use one stated unit throughout the drawing. Give each panel an identifier and mark the orientation where it matters. If overlapping or joining panels is proposed, agree those details and the edge finish before adding them to the order size. A clear photograph with marked dimensions can support the drawing, but it does not replace the agreed specification.
Match the brief to the application
For agricultural bird netting, include the crop, row layout, machinery routes and harvest access. For building bird netting, identify the opening or structure, access points and proposed fixing locations. Avoid assuming the same panel or fixing solution applies to both situations.
If the net will be installed before harvest, use the pre-harvest planning checklist to prepare the site information and receipt checks. Keep the final drawing, sample reference and order revision together so the delivered panels can be checked against the agreement.
Information to send with the enquiry
- Target birds and intended application.
- Labelled dimensions, units, panel quantities and access requirements.
- Any specified material, mesh opening, colour, edge or performance requirement.
- Destination and timing, plus photographs or drawings that explain the site.
See the netting quotation checklist for sample, packing and commercial details. Ask for the available options and evidence for the selected product; no general bird-netting description establishes a guaranteed service life.
Product and order questions: SinoNetting. Use the enquiry form to send the application and proposed specification for confirmation.
